WEEK 8

Title : Block diagram of project

Introduction 

The block diagram is created to identify the inputs and outputs that will be used in the project. It consists of a combination of all of the problems encountered and the information obtained from research with the best solution for the purpose. Block diagram is a diagram of a system in which the parts or functions are represented by block of connected the lines that show the relationship the block. At the end of this section, a complete block diagram.

Objective

1. To design the block diagram that exactly with the required specifications for this project.
2. To know the input and output of the project through a block diagram.

Problem Encountered

From the activities this week, it does not have much of a problem because the information used to make the best solution is from data collected before and it will not give any problem to develop a block diagram.

Project Description

The information gathered from previous research is compressed to achieve the main objective of the project is in an easy and efficient way to create an egg incubator project. Once the input and output are identified through previous studies. Thus, the result was the a block diagram for this project.

Project Outcome

The concept that will be used in Micro controller based eggs incubator is such as block diagram at figure 1 below :-